Sediment Control Permit ePLANS submittal requirements
ePlans is our web-based application for electronic plan submission and review using ProjectDox software. Review ePlans submittal requirements for sediment control permits below.
Basic Submittal Requirements
- File names shall not be longer than 15 characters.
- You must complete your task in order for your project to move forward. This is accomplished on the eForm (can be found under the Workflow Portals tab of your project) and is usually labeled as Notify County.
- Drawings must be uploaded into the Drawings folder. Each drawing is required to be a single file. Documents must be uploaded into the Documents folder. These can be submitted as a single file multi-page PDF. All drawings must have a 3"x4" clear space at the top center of the sheet to allow for DPS batch stamping.
- When submitting corrected information, drawings shall be uploaded into the Drawings folder and documents shall be uploaded into the Documents folder and original file names MUST be maintained. The REVISIONS folder is only permitted to be used after the permit has been issued by DPS.
- Quick Guide (cheat sheet) for ePlans
- Digital Signature of Plans Information
ePlans Submittal Requirements for
SC Engineered
The minimum required submission materials typically include the following:
- Engineered SC Plan that includes Sediment Control and Stormwater Management design
- Stormwater Management and Sediment Control Report/Computations
- Support Drawings
- Stormwater Management Cost Estimate
- Proof of Property Ownership - SDAT or HUD1 document
Sheet/Drawing Type | Sheet/Drawing Reference Number |
Acceptable ePlans File Name |
Number of Characters |
Engineered SC | 0001-999 | SC0001 | 6 |
As-Built | 0001-999 | SCAB0001 | 8 |
SC Engineered for Single Family Lot
Minimum Materials to Submit:
- Engineered SC Plan including Stormwater Management design
- Stormwater Management Report and Computations
- Stormwater Management Cost Estimate
- Proof of Property Ownership - SDAT or HUD1 settlement document
- Support Drawings as Applicable
Sheet/Drawing Type |
Sheet/Drawing Reference Number |
Acceptable ePlans File Number |
Number of Characters |
Engineered for SF Lot | 0001-999 | SCSF0001 | 8 |
Small Land Disturbance
The following are the minimum materials to submit:
- Simplified Site Plan with the Property Boundary - Do Not Show Sediment Control Measures
- Cover Letter or Narrative Explaining Proposed Work; Referencing any Building Permit Number(s)
- Proof of Property Ownership - SDAT or HUD1 documents
- Copy of Notice of Violation if Applicable
Sheet/Drawing Type |
Sheet/Drawing Reference Number |
Acceptable ePlans File Name |
Number of Characters |
SLDA Site Plan | 0001-999 | SLDA0001 | 8 |
Forest Harvest
Minimum Materials to Submit:
- Montgomery Soil Conservation Approved Erosion and Sediment Control Plan
- Cover Letter or Narrative Explaining Proposed Work
- Proof of Property Ownership
Sheet/Drawing Type |
Sheet/Drawing Reference Number |
Acceptable ePlans File Name |
Number of Characters |
Forest Harvest Plan | 0001-999 | SCFH0001 | 8 |
Builder/Developer Transfer
Minimum Materials to Submit:
- Developer's approved Sediment Control plan, highlighting the lots to be included on the builder's Sediment Control permit. Total number of lots must be provided, each lot identified by Lot, Block or Parcel
- Completed Property Transfer Certification/Residential Ownership Transfer Agreement
Sheet/Drawing Type |
Sheet/Drawing Reference Number |
Acceptable ePlans File Name |
Number of Characters |
Owner Transfer Agreement | 0001-999 | SCOT0001 | 8 |
Sediment Control Permit Transfer
Minimum Materials to Submit:
- Original approved Sediment Control Plan that displays new owner information in the owner/certification block with signature. Owner contact information must be updated to show the new owner. Refer to Transfer of Sediment Control Permit form.
- Letter from original owner approving the permit transfer and acknowledging forfeiture of all permitting fees paid.
- Proof of property transfer to new owner.
Sheet/Drawing Type |
Sheet/Drawing Reference Number |
Acceptable ePlans File Name |
Number of Characters |
SC Permit Transfer | 0001-999 | SCPT0001 | 8 |
[email protected]
240-777-0311